2-Pack - H2S+H2O Analyzer System

The SpectraSensors H2S + H2O 2-Pack gas analyzer systems retains the analytical benefits and reliability known by our existing customers. In addition, reduced installation costs, support and complexity are achieved via a single technology for gas quality measurements.

Product Code: 11006

Application Note

Drawings

Application Note

Gas Quality Simplified
The analyzer system includes all required sample conditioning and regulation. The sample system is heated to 50°C (122°F) to keep all constituents in vapor phase.

Training requirements are reduced and the system enables fewer electrical runs, fewer sample runs and less labor. Installation and operational costs are dramatically reduced.

The Installation diagram on the left is a simple representation of connection to the pipeline.

A variety of sample probe products are available to compliment the application.

SpectraSensors offers probes, probe regulators, and heated regulators depending on the pressure in the pipeline, the gas and ambient temperatures and the hydrocarbon dew point.

« Previous | Next »

Data Sheet

Performance
Target Components	H2S + H2O in Natural Gas
Typical Measurement Ranges - H2S	0-20 ± 0.5ppmv (other ranges available)
Typical Measurement Ranges - H2O	0-20 ± 2lb/MMscf (other ranges available)
Measurement Update Time	H2S: 2 seconds H2O: 1 second Total system response is dependant on flow rate and sample system volume
Principle of Measurement	Tunable Diode Laser Absorption Spectroscopy
Environmental Temperature Range	-20º to 50ºC (-4º to 122ºF) -15º to 60ºC (5º to 140ºF) optional
Sample Inlet Pressure	1.5-4 barG (20-50 PSIG) to enclosure inlet
Cell Temperature	-20º to 50ºC (-4º to 122ºF) -15º to 60ºC (5º to 140ºF) optional
Maximum Cell Pressure	70 kPag (10 PSIG)
Sample Flow Rate	H2S: 2-4L/min (4 to 8 scfh) H2O: 0.1-2L/min (0.2 to 4 scfh)
Recommended Validation	H2O: Bureau of Mines Chilled Mirror H2S: Binary Cal Gas Bottle with Methane Background

Electrical
Voltage	100-240 VAC, 50-60 Hz standard
Max Current	3A max @ 120 VAC 1.5A nax @ 24VAC Hz
Communication	4-20mA loop (concentration only), RS232 (all parameters)
Digital Outputs	2, 1 General Fault and 1 Hi/Lo Concentration Alarm per measurement cell
LCD Display	Concentration, Cell Pressure and Temperature & Diagnostics

Physical
Controller Enclosure	NEMA 4X - standard
Dimensions	1450 mm H × 760 mm W × 330 mm D (57” H × 30” W × 13” D)
Weight	Approximately 154Kg (340lbs)
Sample Cell Dimensions	438mm H x 108mm W (17-1/4” H × 4-1/4” W)
Sample Cell Construction	316L Series Polished Stainless Steel standard
Number of Sample Cells	2
Area Classification	CSA Certified for Class I, Division 2, Groups ABCD Temp Code T3C