Skip to Content

P53 Heated Sample Conditioning

 

HEATED SAMPLE CONDITIONING

The P53 Heated Sample Conditioning System ensures performance of gas analyzer by delivering a heated sample through patented technology to the analyzer.

 

This avoids costly errors resulting from hydrocarbon dew point drop out by the maintaining at least 30ºF above the expected hydrocarbon dew point.

The gas sample is heated inside of the regulator before and after the pressure is reduced eliminating hydrocarbon liquid condensation caused by the Joule Thomson effect during the pressure reduction.

 
 

PRODUCT SPECIFICATIONS

Max Allowable Operating Pressure 3750 psig (241 BAR) @ 60ºF (16ºC)
Regulator Single-stage MHR or Multi-stage MJTR
Wetted Parts 360 Stainless Steel
Power 120 VAC/240 VAC/24 VDC
Cobinet Construction Hot-pressed Glass Fiber Reinforced Ployester (GRP) or Stainless

STANDARD COMPONENTS

  • Pressure gauge after regulator
  • Relief valve port out
  • Door-mounted dial thermometer
  • Sample line test port
  • System purge port out
  • Moisture block drain port out