Print View

Your printed page will look something like this.

http://www.spectrasensors.com//10303legacy/

SS2000 - Carbon Dioxide Analyzer Solution

For CO2, the SS2000 Single Channel Analyzer is extremely reliable and tailored for the needs of the natural gas industry. Tunable diode laser (TDL) determines concentration of gas without coming into physical contact with it. Measurements are not hampered by wet-up or dry-down times as with surfaced-based sensors.
 
Product Code: 10303  
 
Drawings
 
 

Application Note

SpectraSensors SS2000 Single Channel Analyzer for CO2 is extremely reliable and tailored for the needs of the natural gas industry. The sensor measures gas using a patented Tunable Diode Laser Diode (TDL) to determine the concentration of the gas without coming into physical contact with the stream.

 

RAPID RESPONSE TIME The SS2000 analyzer takes four measurements per second with a laser and detector and immediately averages the results. Because there is no contact with the gas, real-time measurements are not hampered by wet-up or dry-down times as with surfaced-based sensors.

 

RELIABLE Trustworthy measurements are vital to natural gas pipeline and processing companies. Independent studies have proven that the SS2000 results are highly correlated with those of chilled mirrors. However, chilled mirrors require skilled experts to operate and the results are highly scattered (large standard deviation).

 

Uncertain measurements can be extremely costly. Additional processing of dehydration costs, upset conditions, shut-ins and inconsistent process results may be caused by sensors that do not perform properly. The SS2000 is the first to offer truly reliable measurement and simple operation.

 

LONG LIFE The TDL sensor does not come into contact with the sample gas stream. The result is a sensor which does not suffer from contamination or drift due to vapor impurities such as glycol, methanol or amines.

 

LOW COST OF OWNERSHIP Operating costs are dramatically reduced by eliminating the cost of consumables, extra sensor heads, labor and overhead associated with excessive maintenance.

 

The SS2000 dramatically reduces intangible but real costs associated with unreliable gas measurements. By eliminating added processing steps, detecting poor gas quality and the possibility of costly damage to equipment that can result from sensors that produce incorrect data.

 

« Previous | Next »

Data Sheet


Performance

Target Components

CO2 in Natural Gas

Typical Measurement Ranges

0-10% (other ranges available)

Typical Precision

±1% of reading or ±0.04ppmv (400ppmv) whichever is greater

Measurement Response Time

0.25-2 sec
(Total system response is dependent on
fl ow rate and sample system volume)

Principle of Measurement

Tunable Diode Laser Absorption Spectroscopy

Environmental Temperature Range

-20º to 50ºC (-4º to 122ºF)
-15º to 60º C (-5º to 140º F) optional

Sample Inlet Pressure

10 to 25 PSIA, 10 PSIG Maximum

(70-170kPa Abs, 70kPaG maximum)

Sample Cell Temperature Range

-20º to 50ºC (-4º to 122ºF)
-15º to 60ºC (-5º to 140ºF)

Maximum Cell Pressure

70 kPag (10 PSIg)

Sample Flow Rate
0.1-10 L/min (60.2 to 20 scfh)
Recommended Validation
Binary Cal Gas Bottle with Methane Background
 

Electrical

Voltage

100-240 VAC, 50-60 Hz
9-16 VDC OR 18-32 VDC optional

Max Current

1 amp maximum @ 120 VAC
1.6A @ 24VDC, 3.2A @ 12 VDC

Communication

Generic or Modbus RS232C
4-20mA loop
Digital Outputs
2, General Fault and Concentration Alarm
LCD Display
Concentration, Cell Pressure and Temperature & Diagnostics
 

Physical

Controller Enclosure

NEMA 4X - stainless steel standard

Dimensions

444mm H x 376mm W x 135mm H
(17.5" H x 14.8" W x 5.8" D)

Weight Approximately

Approx 11.5Kg(25lbs)

Sample Cell Dimensions

438mm H x 108mm W
(17-1/4” H × 4-1/4” W)

Sample Cell Construction

316L Series Polished Stainless Steel standard

Number of Sample Cells
1
Area Classification
CSA Certified for Class I, Division 2,
Groups ABCD, Temp Code T3C

 
 

« Previous | Next »

Drawings

SS2000 Single Channel with Stainless Steel Enclosure (NEMA 7,4X)
 
 
SS2000 with Exd aluminum enclosure (NEMA 7,4) 
 
 
 

Accessories

02199-00001

Spares Kit- includes fuses, o-rings and hardware
 

00000-02015

Extended calibration range (up to 100lb/MMSCF H2O)
Other ranges available (consult factory)
 
00000-02013 Tropicalization - conformal coating of boards & moisture-proof sealant at electrical connections
 

01902-93001

Instruction Manuals (up to 2 copies at no charge)
 

01910-30017

Stainless Steel Tag, up to 2 lines of text
 

00000-02014

Certified As-Built Drawings - 2 sets
 
01902-18100 Alarm relays, SPDT, (1) Status & (1) High Concentration not for hazardous location (non CSA)
 
 

« Previous | Next »

Photos

 
 
 

« Previous | Next »