For H2O and CO2, the SS3000 Dual Channel Analyzer is capable of measuring moisture and carbon dioxide using tunable diode laser technology. The two components are measured in a single analyzer. The SS3000 delivers precise, reliable measurements and dramatically reduces maintenance costs.
Overview
SpectraSensors SS3000 Dual Channel Gas Analyzer is capable of measuring moisture and carbon dioxide in this cost effective dual channel system which enhances cost savings by incorporating two sensors in one.
RAPID RESPONSE TIME
The SS3000 analyzer takes four measurements per second with a laser and detector and immediately averages the results. Because there is no contact with the gas, real-time measurements are not hampered by wet-up or dry-down times as with surfaced-based sensors.
TRUSTWORTHY MEASUREMENTS
Dependable data is an essential element in the quest for improved safety and quality. The SS3000 analyzer delivers precise, reliable measurements using patented Tunable Diode Laser (TDL) technology developed by NASA.
The TDL sensor never comes into contact with the sample gas stream. The result is a sensor which does not suffer from contamination or drift due to vapor impurities such as glycol, methanol or amines.
TECHNOLOGY
The analyzer works by shining a laser beam through the sample cell. The laser beam is selected to interact only with the measured compound, creating an absorption signal. The higher the concentration of H2O and CO2, the greater absorption of light and the stronger the corresponding absorption signal. Spectrum Software analyzes these absorption peaks to produce very accurate and repeatable measurements. Since the calculation is a direct, fundamental measurement, the amount of H2O and CO2 present can be measured in real-time.
LOW COST OF OWNERSHIP
Operating costs are dramatically reduced by eliminating the cost of consumables, extra sensor heads, labor and overhead associated with excessive maintenance.
Industries
Drawings
SS3000 Dual Channel with Stainless Steel Enclosure (NEMA 7,4X) – 1 stream
