Skip to Content

SS500e

 

Enhanced Moisture Analyzer

SpectraSensors SS500e Analyzer is an economical analyzer that utilizes the same state-of-the-art technology as SpectraSensors higher detection analyzers, assuring  the user of high reliability and repeatability.

 

SS500e Enhanced Moisture Analyzer

 
 
Data Sheet
Drawings
Certificate

 

 

 

 

 

 

 

Overview

SpectraSensors SS500e Analyzer is an economical analyzer that utilizes the same state-of-the-art technology as SpectraSensors higher detection analyzers, assuring  the user of high reliability and repeatability.

Rapid Response Time

At four measurements per second, the analyzer can measure the fastest changes in the pipeline. Adjustable, real-time results display every 0.25-2 seconds.

No Consumables

Because the analyzer’s sensor never touches the gas stream, it does not get contaminated. The factory set calibration lasts for the life of the analyzer and reconditioning is never required.

Payback

The SS500e very quickly pays for itself by doing away with expensive consumables, extra sensor heads, labor and overhead associated with excessive maintenance. Costs due to unreliable gas measurements can be reduced by eliminating added processing steps, poor gas quality and the possibility of damage to expensive equipment can result from sensors that produce incorrect data.

No Interference

As with all SpectraSensors analyzers, the SS500e combines a patented laser with control electronics and  “smart” software. The analyzer’s sensor heads are not subjected  to  corrosives or contaminants in the gas because the sensor is isolated from the sample gas stream.

The result is an analyzer which does not suffer from contamination or drift due to vapor impurities such as glycol, methanol, amines, hydrogen sulfide, or mercaptans.
 

State of the Art Technology

The analyzer works by shining a laser beam through the sample cell. The laser beam is selected to interact only with the measured compound, creating an absorption signal. The higher the concentration of H2O the greater absorption of light and the stronger the corresponding absorption signal. Spectrum Software analyzes these absorption peaks to produce very accurate and repeatable measurements. Since the calculation is a direct, fundamental measurement, the amount of H2O present can be measured in real-time.
 
 

« Previous | Next »

Industries

The SS500e Single Channel Analyzer measures Moisture in Natural Gas Production


« Previous | Next »

Photos

SS500e_Detail.jpg
 

« Previous | Next »